Skip to main content

Plant hire

1 tonne micro digger hire

The machine that goes through a standard side gate. Hired across Brighton, Hove and Sussex, with or without an operator.

Track width
About 700mm, retracted
Dig depth
Around 1.7m
Access
Standard side gate and most alleyways
Transport
Delivered on our trailer

What it is, and what it will do

Almost every enquiry we get for a micro digger comes down to one thing: can it get round the back? On a Victorian or thirties terrace the route in is a side passage between the house and the boundary wall, and it is usually somewhere between 700mm and 900mm at its tightest. A 1.6 tonne machine will not go. This one will.

At roughly 700mm across the tracks retracted, it clears a standard side gate with the gate off its hinges and often with it still on. It digs to around 1.7m, which covers strip footings for an extension, a garden room base, a soakaway, or a drainage run, the great majority of what people actually want a digger in a back garden for.

What you give up against the 1.6 is reach and breakout. It will move soil and clay all day; it will struggle with a slab of reinforced concrete or a lot of old hardcore. If that is your job, tell us and we will point you at the bigger machine or send an operator.

What you can do with a micro digger

Most of our micro digger hires are for the same handful of jobs, nearly all of them in gardens where nothing bigger can get in:

  • Strip footings and trenches for a rear extension or a garden wall
  • The base dig for a garden room, shed or summerhouse
  • Soakaways and drainage runs
  • Clearing an old patio base, a worn-out lawn or overgrown beds ahead of new landscaping
  • Digging out for a new path or a small driveway extension where access is tight

Micro digger hire in Hove

Hove is where this machine earns its keep. So many of its streets are terraces where the only way into the back garden is the side passage, and that is exactly the job a micro digger is built for. For micro digger hire in Hove we deliver and collect on our own trailer, and Hove sits well inside the 10 miles from Brighton that our published rates cover, so the price you see is the price you pay. Measure the narrowest point on the way in, tell us the number, and we will confirm it fits before the trailer leaves.

Before you hire the micro digger

Three checks save most of the problems. First, measure the narrowest point on the route in, which is rarely the gate itself. Meters, downpipes, bins and overhanging planting are what usually pinch it. Second, check for buried services such as gas, water, electric and drains before the first bucket goes in, and hand-dig around anything you find. Third, decide where the spoil is going. A micro digger fills a heap quickly, but getting that heap to a skip is the slow part, which is why many customers add the tracked barrow to the same hire. If the route crosses a lawn, laying boards along it keeps the grass in better shape.

Hiring it with other equipment

If you are digging out for a patio, path or base, the wacker plate compacts the sub-base afterwards. If your access is wider than a side passage and you want more reach, depth and breakout force, have a look at the Takeuchi mini digger instead.

Get a quote for the Yanmar

Tell us what you are digging, roughly where it is, and the narrowest point on the way in. We will confirm the Yanmar fits, give you a price for the hire and delivery, and book it in. There is no account to open. Use the contact page to send us the details.

Figures are typical for a 1 tonne Yanmar. Measure your gate and tell us the number when you book, and we will confirm it against the actual machine before the trailer leaves.

Good for

  • Garden rooms and shed bases
  • Footings in a back garden
  • Drainage runs and soakaways
  • Digging out a small patio

When it is the wrong machine

  • Breaking out reinforced concrete or deep hardcore
  • Footings deeper than about 1.7m
  • Large-volume muckaway where the 1.6 would halve the time
  • Anything needing a breaker on heavy slab

Ring us and describe the job; we would rather send the right machine than the one you asked for.

Access

What to measure before you book.

The most useful thing a plant hire page can tell you, and the thing almost none of them do. Most customers do not know what to measure, so they guess, and the guess is what costs everybody a wasted delivery.

  1. Measure the narrowest point, not the gate

    People measure the gate and forget the bin store, the meter box, the step or the gate post itself. Walk the route the machine has to take and measure the tightest thing on it.

  2. Tell us the number when you book

    If it is over 800mm we are confident. Between 700mm and 800mm, send us a photo and we will tell you straight. Under 700mm and it is not going through. Better to know now.

  3. Steps and walls are usually fine

    We carry timber ramps. A couple of steps or a low retaining wall is a normal morning, not a problem. Height and turns matter more than a level route.

What does it cost?

Delivered and collected within 10 miles of Brighton. No account to open, no minimum spend, and no charge for the trailer.

First day
£150 One day's hire, delivered and collected within 10 miles.
Five-day week
£320 Monday to Friday on site. Cheaper than five days taken singly.
Each extra day
£50 Added to the hire as you need it. Ring us rather than rebooking.

Further than 10 miles out? Ring us with the postcode and we will price the delivery.

Ask us about VAT when you book, and we will confirm it in writing.

Hire it with

What people take alongside it.

Hired together, delivered together, on one trailer and one price.

500 kg payload

A powered dumper on tracks. It moves spoil, muck and aggregate over soft ground and up slopes that would stop a wheelbarrow, and it will save a labourer's day on almost any dig.

Compactor

Plate compactor for consolidating Type 1 and bedding sand. The bit people skip, and the reason a driveway sinks two winters later.

Questions

Access, licences and getting it in.

If yours is not here, ring us. We would rather answer it now than on the doorstep.

  • Measure the narrowest point on the route in, including any bin store, step or gate post, and tell us the number. The 1 tonne Yanmar is around 700mm across the tracks and goes through a standard side gate; the 1.6 tonne Takeuchi is around 990mm and needs a driveway, double gates or a ramped wall. If it is close, send us a photo of the access and we will tell you straight rather than turning up and finding out.

  • Usually, yes. Between the micro digger and a set of timber ramps we get machines over retaining walls, up steps and through alleyways that look impossible. The photograph on our homepage is exactly that job. Where a machine genuinely cannot get in, we will say so rather than sell you a hire that ends in a wasted delivery charge.

Read all 10 questions, or ring 07748 355197 and describe the job. It takes two minutes and it is free.

Next step

Need the yanmar micro digger?

Tell us your dates, your postcode and the narrowest point on the way in. You will have a price that includes delivery and collection.

Call now WhatsApp