1 tonne
The one that fits through a side gate. At roughly 700mm across the tracks it goes where nothing bigger will, which on a Brighton terrace is usually the whole question.
Plant hire
Plate compactor for sub-base and bedding sand. The step people skip, and the reason a driveway sinks two winters later.
Compaction is the least visible part of a job and the one that decides whether it is still flat in five years. Type 1 that has been tipped, raked level and paved over looks identical on the day to Type 1 that has been compacted properly. The difference shows up the first wet winter, as dips, rocking slabs and a driveway that has settled into tyre tracks.
A plate compactor does in an afternoon what no amount of treading can. It goes over sub-base, over bedding sand, and over the backfill on a trench so the reinstatement does not sink below the surface around it.
It is the cheapest thing on this page and the one most likely to save a job. If you are hiring a digger to dig out a patio or a driveway, hire this with it.
Most of our wacker plate hire in Brighton goes out alongside a digger for a patio or driveway dig-out, but it is just as useful on its own if you have dug out by hand, or you are laying a path, a shed base or a garden room slab. Like everything we hire, it is delivered and collected on our own trailer, and anywhere within 10 miles of Brighton is covered by the published rates.
Compact in layers rather than in one deep pile. As a rough guide, spread and rake the material in layers of around 100mm to 150mm and make several overlapping passes over each before adding the next. Slightly damp material compacts better than bone-dry dust or a soaking wet mix. Finish with a final pass once the surface is level, and check it with a straight edge before you lay anything on top.
A plate is loud and vibrates hard, so wear ear protection, gloves and sturdy boots, and take regular breaks on a long job. Keep it away from the edge of an open trench, and take care close to freshly built walls and foundations, as the vibration can disturb them.
The usual combination is a digger for the dig-out, the plate for the base, and the tracked barrow for moving spoil and Type 1. Take a look at the Yanmar micro digger for tight access or the Takeuchi mini digger where you have more room.
Tell us what you are compacting and roughly how big the area is. We will give you a price for the hire and delivery and book it in. There is no account to open. Send the details through the contact page.
Ring us and describe the job; we would rather send the right machine than the one you asked for.
Access
The most useful thing a plant hire page can tell you, and the thing almost none of them do. Most customers do not know what to measure, so they guess, and the guess is what costs everybody a wasted delivery.
It is a two-person lift rather than a machine that has to be tracked in. Access is almost never the question with this one.
The single most common mistake is dumping 200mm of Type 1 and running the plate over the top. Compact in layers of around 75 to 100mm and it will actually consolidate all the way down.
Slightly damp sub-base compacts far better than bone dry. Saturated does not compact at all. It just moves.
Delivered and collected within 10 miles of Brighton. No account to open, no minimum spend, and no charge for the trailer.
Further than 10 miles out? Ring us with the postcode and we will price the delivery.
Ask us about VAT when you book, and we will confirm it in writing.
Hire it with
Hired together, delivered together, on one trailer and one price.
1 tonne
The one that fits through a side gate. At roughly 700mm across the tracks it goes where nothing bigger will, which on a Brighton terrace is usually the whole question.
TB016
1.6 tonne
The workhorse. Noticeably more reach and breakout than the micro, and still small enough for a domestic driveway. This is the machine in the photograph above, going up ramps into a back garden.
Questions
If yours is not here, ring us. We would rather answer it now than on the doorstep.
Measure the narrowest point on the route in, including any bin store, step or gate post, and tell us the number. The 1 tonne Yanmar is around 700mm across the tracks and goes through a standard side gate; the 1.6 tonne Takeuchi is around 990mm and needs a driveway, double gates or a ramped wall. If it is close, send us a photo of the access and we will tell you straight rather than turning up and finding out.
Usually, yes. Between the micro digger and a set of timber ramps we get machines over retaining walls, up steps and through alleyways that look impossible. The photograph on our homepage is exactly that job. Where a machine genuinely cannot get in, we will say so rather than sell you a hire that ends in a wasted delivery charge.
Read all 10 questions, or ring 07748 355197 and describe the job. It takes two minutes and it is free.
Next step
Tell us your dates, your postcode and the narrowest point on the way in. You will have a price that includes delivery and collection.
We use cookies to run this site and, if you allow them, to understand visits and measure our adverts. Privacy policy